AVR breakout boards
Sometimes I want to prototype something quickly with AVR
microcontrollers. I made these useful breakout boards that have the
same footprint as an AVR in DIP packaging but also have an programming
header on the PCB. I use loose turned socket pins to insert the AVR in.
This is basically a turned pin socket with extra stuff on board. Ample
decoupling, power LED and the 6 pin ISP header.
Breakout for the Attiny2313 style footprint devices:
Design files for the attiny2313 breakout
Breakout for the ATtiny26 style footprint devices:
Design files for the attiny26 breakout
I am planning to make some breakout boards for the ATmega16, ATmega8,
ATmega162 devices.
Back
Last update at: 26-09-2010